IMPLICATIONS OF ON‐GROUND NITROGEN LOADING AND SOIL TRANSFORMATIONS ON GROUND WATER QUALITY MANAGEMENT1

ABSTRACT: This paper presents a modeling approach based on a geographic information system (GIS) to estimate the variability of on‐ground nitrogen loading and the corresponding nitrate leaching to ground water. The methodology integrates all point and nonpoint sources of nitrogen, the national land cover database, soil nitrogen transformations, and the uncertainty of key soil and land use‐related parameters to predict the nitrate mass leaching to ground water. The analysis considered 21 different land use classes with information derived from nitrogen sources such as fertilizer and dairy manure applications, dairy lagoons, septic systems, and dry and wet depositions. Simulations were performed at a temporal resolution of one month to capture seasonal trends. The model was applied to a large aquifer of 376 square miles in Washington State that serves more than 100,000 residents with drinking water. The results showed that dairy manure is the main source of nitrogen in the area followed by fertilizers. It was also seen that nitrate leaching is controlled by the recharge rate, and there can be a substantial buildup of soil nitrogen over long periods of time. Uncertainty analysis showed that denitrification rate is the most influential parameter on nitrate leaching. The results showed that combining management alternatives is a successful strategy, especially with the use of nitrification inhibitors. Also, change in the land use pattern has a noticeable impact on nitrate leaching.     

Influence of canola and sunflower diet amendments on cattle feedlot manure

Cattle (Bos taurus) producers can replace a part of the traditional diet of barley (Hordeum vulgare L.) grain/silage with sunflower (Helianthus annus L.) seeds or canola meal (Brassica napus L.)/oil to enhance conjugated linoleic acids (CLA) content in milk and meat for its positive health benefits. The objective of this study is to investigate the effects of feeding sunflower or canola to finishing steers on cattle manure chemical properties and volatile fatty acid (VFA) content. The control diet contained 84% rolled barley and 15% barley silage, which provided only 2.6% lipid. The other six treatments had 6.6 to 8.6% lipid delivered from sources such as hay, sunflower seed (SS), canola meal/oil, and SS forage pellets. Manure samples (a mixture of cattle urine, feces, and woodchip bedding materials) were collected and analyzed after cattle had been on these diets for 113 d. The dietary source and level of lipid had no effect on organic N and nitrate N content in manure, but significantly affected ammonia N and VFA. Inclusion of SS forage pellets, hay, or canola meal/oil in cattle diets had no significant impact on manure characteristics, but SS significantly reduced the pH and increased propionic, isobutyric, and isovaleric content. In addition, N loss after excretion (mainly from urine N) increases with the pH and N levels in both feed and manure. The combination of SS with barley silage resulted in a lower VFA and NH3 content in manure and should be a more attractive option. To better manage N nutrient cycles and reduce NH3 related odor problems, feed and manure pH should be one of the factors to consider when determining feed mix rations.     

Wastewater treatment with multilayer media of waste and natural indigenous materials

Wastewater treatment using waste materials (refuse concrete, waste paper and charcoal) and natural indigenous rocks (andesite, limestone, granite and nitrolite) in the form of multilayer media was investigated. The removal of suspended solids (SS), phosphate ion, nitrate ion, ammonium ion, toxic metals and chemical oxygen demand (COD) were evaluated for the multilayer wastewater treatment system. Effective removal of heavy metals such as cadmium, chromium, mercury and lead was demonstrated. SS and phosphate ion were removed with relatively high efficiency and the COD after treatment was lessened using certain combinations of media. The present wastewater treatment system is simple, convenient and low cost. Therefore, this method can be applied in small scale plants for wastewater treatment in local and nonexclusive areas.     

The interactions of Cr (VI) concentrations and amendments (biochar and manure) on growth and metal accumulation of two species of Salicornia in contaminated soil

Environmental Science and Pollution Research - Heavy metals are among the most dangerous contaminants in the environment. Organic components and plant species that can accumulate and stabilize...     

The effects of using reprocessable material on the durability and mechanical properties of landfill leachate collection HDPE pipes

This paper investigated the durability and mechanical properties of landfill leachate collection HDPE pipes which had been made of different weight percent amounts of virgin and reprocessable HDPE compounds (VC and RC). Durability is reported base on the chemical properties, obtained through oxidative induction time (OIT) and melt flow index (MFI) measurements, at the temperature of 50 °C and over a period of 12 months immersion in a synthetic leachate. Mechanical properties are also described according to tensile and pressure tests which had been conducted on the pipes samples. All of the factors were examined had been affected by the addition of RC, but for the special combination the antioxidant depletion was significantly affected by the experimental aging condition and no important changes had been observed in the other pipe properties. The results from OIT tests indicate that the rate of antioxidant depletion is reduced by an increase in the weight percent amounts of RC, during the experimental aging condition. This reduction is probably attributed to the extraction of antioxidants from RC in their recovery process. Finally, although these results are related to the particular HDPE compound, antioxidant formulation and condition examined, but it can be said that the use of clean own reprocessable material for the production of landfill leachate pipes shall be permitted without limitations.     

Toward a robust analytical method for separating trace levels of nano-materials in natural waters: cloud point extraction of nano-copper(II) oxide

Cloud point extraction (CPE) factors, namely Triton X-114 (TX-114) concentration, pH, ionic strength, incubation time, and temperature, were optimized for the separation of nano-sized copper(II) oxide (nCuO) in aqueous matrices. The kinetics of phase transfer was studied using UV–visible spectroscopy. From the highest separation rate, the most favorable conditions were observed with 0.2 %?w/v of TX-114, pH?=?9.0, ionic strength of 10 mM NaCl, and incubation at 40 °C for 60 min, yielding an extraction efficiency of 89.2?±?3.9 % and a preconcentration factor of 86. The aggregate size distribution confirmed the formation of very large nCuO–micelle assemblies (11.9 μm) under these conditions. The surface charge of nCuO was also diminished effectively. An extraction efficiency of 91 % was achieved with a mixture of TX-100 and TX-114 containing 30 wt.% of TX-100. Natural organic and particulate matters, represented by humic acid (30 mg/L) and micron-sized silica particles (50 mg/L), respectively, did not significantly reduce the CPE efficiency (<10 %). The recovery of copper(II) ions (20 mg/L) in the presence of humic acid was low (3–10 %). The spiked natural water samples were analyzed either directly or after CPE by inductively coupled plasma mass spectrometry following acid digestion/microwave irradiation. The results indicated the influence of matrix effects and their reduction by CPE. A delay between spiking nCuO and CPE may also influence the recovery of nCuO due to aggregation and dissolution. A detection limit of 0.04 μg Cu/L was achieved for nCuO.     

Influence of polymethyl acrylate additive on the formation of particulate matter and NOX emission of a biodiesel–diesel-fueled engine

Environmental Science and Pollution Research - The aim of this study is to investigate the effect of the polymethyl acrylate (PMA) additive on the formation of particulate matter (PM) and nitrogen...     

Assessing stress response of Stylophora pistillata towards oil and phosphate pollution in the Gulf of Aqaba,using molecular and biochemical markers

Crude oil (from oil terminal) and raw phosphate (from phosphate port) pollution are responsible for the lowered health conditions of coral reefs at their vicinity in the Jordanian coast of the Gulf of Aqaba. Both in situ incubations and ex situ laboratory exposure experiments were used to study the effects of those pollutants on corals, by using molecular and biochemical biomarkers in the coral Stylophora pistillata. For ex situ part of the experiment, crude oil and raw phosphate were added to a final concentration of 500?ppm for both pollutants. The DNA damage was assessed by Comet assay, while biochemical stress markers were reassessed by lipid peroxidation (LPO) test. Although the corals looked healthy from outside, the use of stress biomarkers indicated that they are under high pressure at the cellular level. The corals incubated with oil and phosphate had more DNA damage and LPO in comparison with the control samples. The results obtained suggest that the use of stress biomarkers can be used as important prognostic tools for examining the sub-lethal stress on corals before their death.     

Application of spatial analysis to investigate contribution of VOCs to photochemical ozone creation

Environmental Science and Pollution Research - This study was concerned with the temporal analysis of benzene, toluene, ethylbenzene, xylenes (BTEXs), and ozone in Rochester, New York, between 2012...